Password for privileged exec mode works and shows up encrypted in running config of the switch Telnet from Host B succeeds and login banner shows Grading: Host B obtains an IP address with DNS suffix
Set that the switch learns the first encountered MAC address of a host that connects into the port.enable port security and set the maximum number of hosts connected to this interface to 1.
set the port into the access mode and acces VLAN number 20.Configure the interface f0/2 (connected to Host A) as follows:.Set the IP default gateway to "10.0.0.1" and set switchport mode of the interface that has the router connected to "trunk".Set password and login for all Telnet lines (0 to 15).Set an encrypted secret password for the privileged exec mode.Change the switch name into "MY_SWITCH".Get into the global configuration mode of switch A.Save the file right away with the name "BasicConf-end".Open the file "#DIRECTORY#\#GROUP#\BasicConf-start".The image of the starting network is below:
Host B has blank IP settings (DHCP will give them) and host A's settings can be viewed by right-clicking its icon and choosing "Configs". The starting point is a switch and a router with almost blank configurations and two connected PCs to the switch.
The first task presents the basic command set that is invoked with all the Cisco switches and routers plus setting up DHCP, a management VLAN and port security commands. Task 1: Basic Configurations, DHCP and port security Typical terminal inputs like up arrow for previously used commands and TAB for autocomplete might also be useful. Also pressing ctrl+z will return to privileged exec mode. Typing a question mark ( ?) will list all available commands and options. You can return from any mode via exit or logout. After that you can get to config mode via configure terminal or conf t.
Mostly you will need to get to "privileged exec mode" via typing command enable or en. Right-clicking will open "physical" connections panel.Ĭonfiguring happens in different modes (see the documentation powerpoint for "Cisco IOS modes" for more info). It is advised to save your own solution with a different name before you begin doing the task.Ĭommand line interfaces of all simulated devices (routers, switches, hosts) can be accessed by double-clicking the device. The configuration files are opened and saved by File->Open/Save (or Ctrl+O, Ctrl+S). All tasks are done in the "Net Visualizer Screen".
The simulator software (CCNA Network Visualizer 6.0) can be accessed from the shortcut on the desktop of the Windows machines. Store your files for example on Dropbox or Google Drive or send an email to yourself. Do not save anything on the Windows machines. You need to do these labs on specific machines in Paniikki class (you receive information for logging in via email if you have enrolled for the excercise). Fill it in and return it together with your final configuration files.